Roof Restoration Sydney
Click the play button to see the cement roof restoration process from start to finish!
Step 1: Inspection
The entire roof is inspected for damaged tiles, loose or missing bedding and moss/lichen.
Step 2: Repair/Replace
Damaged tiles and faulty valley irons are replaced.
Step 3: Clean
The roof is cleaned using a high pressure cleaner. No chemicals are used to ensure environmental protection.
Step 4: Rebed
All ridge capping is rebedded, where required.
Step 5: Repoint
Ridge capping is then repointed with a flexible acrylilc pointing mix.
Step 6: Sterilise
(Where necessary) Fungal and Algal spoilage must be completely destroyed before re-coating, otherwise the growth will continue resulting in potential failure.
Step 7: Primer/Sealer
The entire roof area is coated with an acrylic sealer/primer to ensure strong adhesion with the 962 Roof Membrane.
Step 8: 962 Roof Membrane
A water based elastromeric high build coating for application to concrete roof tiles and metal roofs. 962 Roof Membrane provides ultimate protection, durability, colour retention and weather proofing. Two coats, each at least 4 times thicker than paint, are applied for complete protection.